The UK’s transition to low-carbon heating has accelerated dramatically in 2025. With government incentives, rising gas prices and a national push toward net-zero. Heat pumps, particularly air-source heat pumps are now installed at record levels.
But alongside the environmental benefits, a hidden side-effect has emerged: a sharp increase in damp and condensation issues across UK homes. At Rochester Building & Damp, we’ve seen a noticeable rise in surveys where the root cause isn’t poor maintenance, but a heating system the house wasn’t designed for.
This article explains why heat pumps, despite their advantages, are unintentionally fuelling a new wave of moisture problems in thousands of British properties.
1. Heat Pumps Run Cooler And That Changes Everything
Traditional boilers deliver water at 65–75°C. Heat pumps typically run at 35–50°C.
This means radiators feel lukewarm, not hot, and rooms heat up more slowly.
The result?
longer periods of cool air against cold walls
slower drying of everyday moisture
more time for condensation to form
Even well-installed heat pumps create lower surface temperatures, especially in older properties with minimal insulation.
Damp is no longer just about leaks; it’s about a shift in heat dynamics. This means that in the long term, interstitial condensation can form at a ‘dew point’ beneath the plastered internal wall surfaces, creating expansive damp-patches that causes paint to blister and wallpaper to peel.
2.Old Properties Cannot Handle Low Temperature Heating
Victorian and early 20th-century housing stock was built to “breathe,” relying on high-temperature, intermittent heating.
A lower-temperature heat pump disrupts this balance:
cold masonry takes longer to warm
thermal bridges get colder
single-brick walls retain moisture longer
bay windows and chimney breasts become condensation hotspots
These buildings weren’t designed for slow, low-level heating. They need significant upgrades, air-tightness, insulation, ventilation, which many installations overlook. As an example, to thermally line a three bedroom Victorian terrace property and install adequate passive ventilation can cost anywhere between £10,000 to £30,000. At present, there are no government grants to reduce this substantial hidden cost.
3. Occupants Change Their Behaviour (and Make Damp Worse)
Heat pumps encourage new habits, often unintentionally harmful:
lower radiator temperatures = laundry drying indoors for longer
slower warming = windows closed for longer periods
increase in zoned heating leaving parts of the home cold
people blocking trickle vents to “keep heat in”
These behavioural changes can increase atmospheric moisture levels in a three bedroom Victorian terrace property by up to 25 litres per 24 hours.
4. Installer Training
Many heat pumps have been installed as “drop-in replacements” for boilers without the home being adapted properly.
We regularly encounter:
undersized radiators
no whole-house ventilation plan
insufficient insulation
incorrectly set flow temperatures
systems designed for EPC paperwork, not real-life usage
When a low-temperature system is forced into a high-temperature building envelope, moisture inevitably wins.
5. Heat Pumps Create New Cold Spots Homeowners Aren’t Aware Of
Collated PDA survey results for 2025 show a consistent pattern:
front bay windows: heavy condensation and mould
north-facing walls: slow heat-up times and damp patches
spare rooms: rarely heated, becoming moisture traps
internal corners: now the coldest points in the house
lofts: moisture rising due to longer heating schedules
Many homes were perfectly stable under gas boilers until the heat pump tipped the balance.
6. Why the Rise in Damp Is Not the Heat Pump’s Fault
The technology itself isn’t the villain.
The problem is retrofit without preparation.
To make a heat pump work properly, homes often need:
improved insulation
larger radiators
pipework upgrades
controlled ventilation
correct thermostat zoning
proper commissioning
Without these, humidity rises faster than a heat pump can compensate for.
7. How Homeowners Can Prevent Damp with Heat Pumps
At Rochester Building & Damp, our practical recommendations include:
• Increase Ventilation Intelligently
Trickle vents open. Mechanical systems where needed.
• Boost Radiator Sizes in Key Rooms
Especially bays, north walls and ground floors.
• Run Heat Pumps Longer—but Thoughtfully
Short bursts don’t work. Balanced, continuous heating does.
• Avoid Turning Off Rooms Completely
Cold rooms become moisture reservoirs.
• Use Dehumidifiers During the Transition Period
Particularly in winter or after laundry drying.
• Get a Damp and Thermal Assessment
We identify cold bridges, insulation gaps and humidity hotspots.
The Verdict: A Green Upgrade with an Unexpected Side-Effect
The current generation of heat pumps simply cannot match the performance of modern gas boilers and it’s telling that many installers who fit them admit they wouldn’t choose one for their own home. The technology will undoubtedly improve, but it isn’t there yet.
A major issue lies with the UK’s housing stock. A huge proportion of homes are built from single-skin 9″ brickwork, while even early and mid-20th-century cavity properties tend to be draughty, poorly insulated and slow to retain heat. In this context, today’s heat pumps are not well suited to either our buildings or our climate. As a result, many installations come with unintended side-effects, most notably increased condensation, water ingress and mould.